Aluminium Conveyor - FH Series - 105mm Wide

The FH aluminium conveyor is based on an anodized aluminium beam fitted with low friction slide rail which guides the flexible plastic chain. Tight radius wheel bends and larger radius plain bends mean products, large and small can be carried around both horizontal and vertical bends.  Bends start at 160mm radius with bend angles of 30°, 45°, 90° and 180°. Guide rails on the sides of the conveyor make sure that the products stay on track. Plastic Slat Conveyor
Downloads
PDF FH - Technical Catalogue PDF MG & F- Guide Rail PDF FC - Structural System PDF MA - Accessories

Technical Details

Type / Model FH
Chain width 103mm
Beam width 105mm
Drive Front, Suspended, Catenary, Horizontal Wheel Bend
Idler End
Chain Plain, Friction, Cleated, Steel top, Roller
Horizontal Wheel Bend  
Radius 150mm -
Radius 160mm 30°, 45°, 90°, 180°
Radius 200mm -
Horizontal Plain Bend  
Radius 500mm 30°, 45°, 60°, 90°
Radius 700mm -
Radius 1000mm 30°, 45°, 60°, 90°
Vertical Bend  
Radius 300mm -
Radius 400mm 5°, 7°, 15°, 30°, 45°,  60°, 90°
Radius 1000mm -
Tensile strength at 20°C 5500N
Maximum working tension 1500N
Working temperature -20°C to 60°C
Recommended running speed 3-50 m/min
Max. conveyor length (depend on layout) 30m
Minimum turning radius 170mm
Link spacing (Pitch) 35.4mm
Chain weight (plain chain) 1.7kg/m
Chain weight (friction chain) 1.7kg/m
Chain weight (gripper chain) -

 

MODU Systems Europe Limited
Unit 9 The Christy Estate,
Ivy Road, Aldershot,
Hampshire GU12 4TX
United Kingdom

Tel:+44 (0)1252 369818

Email: sales@modu-europe.com 

Web:  www.modu-europe.com