Aluminium Conveyor - MS Series - 65mm wide
The MS aluminium conveyor is based on an anodized aluminium beam fitted with low friction slide rail which guides the flexible plastic chain. Tight radius wheel bends and larger radius plain bends mean products, large and small can be carried around both horizontal and vertical bends.б═ Bends start at 150mm radius with bend angles of 30б╟, 45б╟, 90б╟ and 180б╟. Guide rails on the sides of the conveyor make sure that the products stay on track. Plastic Slat Conveyor

Technical Details

Type / Model MS
Chain width 63mm
Beam width 65mm
Drive Front, Combined, Suspended, Intermediate
Idler End
Chain Plain, Friction, Flocked
Horizontal Wheel Bend  
Radius 150mm 30б╟, 45б╟, 90б╟, 180б╟
Radius 160mm -
Radius 200mm -
Horizontal Plain Bend  
Radius 500mm 30б╟, 45б╟, 60б╟, 90б╟
Radius 700mm 30б╟, 45б╟, 60б╟, 90б╟
Radius 1000mm 30б╟, 45б╟, 60б╟, 90б╟
Vertical Bend  
Radius 300mm 5б╟, 7б╟, 15б╟, 25б╟, 45б╟,б═ 90б╟
Radius 400mm -
Radius 1000mm 25б╟, 45б╟,б═ 90б╟
Tensile strength at 20б╟C 3000N
Maximum working tension 500N
Working temperature -20б╟C to 60б╟C
Recommended running speed 3-50 m/min
Max.conveyor length (depend on layout) 30m
Minimum turning radius 150mm
Link spacing (Pitch) 25.4mm
Chain weight (plain chain) 0.75kg/m
Chain weight (friction chain) 0.75kg/m
Chain weight (gripper chain) -

MODU Systems Europe Limited
Unit 9 The Christy Estate,
Ivy Road, Aldershot,
Hampshire GU12 4TX
United Kingdom

Tel:+44 (0)1252 369818